logo
Good price  online

products details

Home > Products >
Party Marquee Tents
>
Curved Roof Poolside Reception Party Tent Clear Span Canopy Aluminum Frame Structure

Curved Roof Poolside Reception Party Tent Clear Span Canopy Aluminum Frame Structure

Brand Name: Tendars
Model Number: TDP-CR08X16
MOQ: 48 square meters
Price: USD 42-58 / Square Meter
Packaging Details: Curved beams in timber cradles, roof in numbered bags per bay, gutters nested, hardware in one case
Payment Terms: T/T 30% deposit, balance before shipment; L/C at sight above USD 30,000
Detail Information
Place of Origin:
Guangdong, China
Certification:
ISO9001, SGS, COC, CE
Span Width:
8m
Length:
16m (2 Bays Of 8m)
Eave Height:
2.5m
Crown Height:
4.6m
Floor Area:
128 Square Meters
Area Per Guest:
5 Sqm Per Guest, 25 To 26 Guests
Main Frame:
122 X 68 X 3mm Curved Aluminium 6061/T6
Base Plate:
350 X 350mm Hot Dip Galvanised Steel
Roof Fabric:
850gsm PVC, DIN 4102 B1
Gutter:
150mm Aluminium With 75mm Downpipe Per Bay
Wind Load:
0.35 KN/sqm
Frame Life Span:
20+ Years
Production Time:
25 Days
Supply Ability:
40000 Square Meters per Month
Highlight:

Curved Roof Party Tent Aluminum Frame

,

Clear Span Canopy Poolside Reception

,

Aluminum Frame Party Marquee Tent

Product Description

8m x 16m curved roof party tent, 128 sqm

The first size that reads as a building from a distance. 128 sqm, 25 to 26 guests, curved roof and no ridge beam crossing the room.

Details

An 8m curved roof carries load along the arc into the eaves, so the frame is lighter than an A-frame of the same span and the inside has no ridge to hang under or walk around. For a reception with a long head table against one wall, that matters.

Area guide: 5 sqm per guest under 10m span. 128 sqm holds 25 to 26 guests at round tables with a dance floor and bar.

Water runs into gutters at both eaves instead of off the gables, so the entrance stays dry and the downpipes sit at the wall line - useful on a poolside site where you do not want a waterfall into the pool.

Size range and options

  • Span: 8m. Range 3m to 10m, curved from 8m.
  • Length: 8m bays, so 8, 16, 24m.
  • Eave: 2.5m. 3m for a stage end.
  • Walls: solid, window band, clear, or open sides for a summer reception.
  • Extras: gutters, ground bar, cassette floor, lining, HVAC, LED wash bars.

Main components

Frame. 122 x 68 x 3mm curved aluminium 6061/T6, galvanised connectors, 350 x 350mm base plates. 20+ years.

Covers. 850gsm PVC roof to DIN 4102 B1, 650gsm walls. Clear roof panels can be substituted along the crown on request.

Drainage. 150mm aluminium gutter each long side with a 75mm downpipe per bay. On a poolside site we route the outlets away from the deck.

Specification

ItemSpecification
Clear span / length8m / 16m in 8m bays
Eave / crown2.5m / 4.6m
Frame122 x 68 x 3mm curved aluminium 6061/T6
Roof / walls850gsm / 650gsm PVC, DIN 4102 B1
Drainage150mm gutter, 75mm downpipe per bay
Wind load0.35 kN/sqm
Frame life20+ years

Poolside and coastal notes

Anchoring. Decking and paving around a pool rarely allow drilling. Use 350 x 350mm plates with 60kg blocks per leg, and keep the blocks off the coping stones - they crack.

Salt air. Anodised frame and galvanised connectors handle coastal sites; the fabric is the part that ages fastest. Rinse the roof twice a season and it holds colour far longer.

Wind at the water. Open water gives a clean wind with no shelter. Add two guys per gable on any poolside install.

Production and installation

25 days production after deposit, plus freight to your port. Six people, about six hours. Installation is quoted separately: labour, air tickets, visa, food and accommodation are paid by the buyer. Send us the site address and we confirm crew size, days and cost.

FAQ

Can it be open sided? Yes, and at 8m the curve looks best with two long walls open and the gables closed.

Does the curved roof collect water? No. Both curves fall to the gutters. The only trap is a blocked downpipe, so we fit a leaf guard.

Can we print branding on it? Yes, on the walls and on the gable panels. Full roof print on an 8m curve is possible but expensive.