| Brand Name: | Tendars |
| Model Number: | TDP-PG05X05 |
| MOQ: | 25 square meters |
| Price: | USD 42-58 / Square Meter |
| Packaging Details: | Four legs and four roof rafters in one bundle, pyramid roof in a separate bag, hardware carton |
| Payment Terms: | T/T 30% deposit, balance before shipment; PayPal below USD 5,000 |
Four legs, a peaked hip roof, no centre pole. Stands alone in a garden or bolts onto the end of a larger tent as an entrance porch.
The roof is cut from four triangular panels tensioned to a peak at 4.2m. There is no ridge beam, so the underside is clean and the tent photographs well from any angle - which is why event hire companies buy these in pairs for entrances and bars.
Area guide: 5 sqm per guest under 10m span. 25 sqm takes 5 guests at a round table, or works as a bar and reception point.
The four legs sit on 350 x 350mm plates, so it can be staked on turf, bolted on paving or ballasted on a roof terrace without a frame change.
Frame. 84 x 48 x 3mm anodized aluminium 6061/T6. Anodised rather than powder coated because a pagoda is usually the visible entrance piece and the finish is what people touch.
Roof. 650gsm PVC cut into four triangles, heat welded at the hips with a reinforced peak cap. The peak is where these roofs fail first, so the cap is double layered.
Fixings. Galvanised corner castings, M12 bolts, 350 x 350mm base plates with four anchor holes each.
| Item | Specification |
|---|---|
| Size | 5 x 5m square, 25 sqm |
| Eave / peak | 2.5m / 4.2m |
| Frame | 84 x 48 x 3mm anodized aluminium 6061/T6 |
| Roof | 650gsm PVC, four panel hip cut |
| Walls | 500gsm PVC, up to four panels |
| Packed weight | About 96kg |
| Frame life | 20+ years |
Assemble the four legs and eave beams on the ground first, then lift and pin. Fit the roof with the peak cap loose, tension the four hips evenly, and tighten the cap last. If you tension one side fully before the others, the peak pulls off centre and stays there.
Two people, 45 minutes. One person can do it but the roof lift at 4.2m needs a ladder and a calm day.
25 days production after deposit, plus freight to your port. Two people, under an hour on site. Installation is quoted separately: labour, air tickets, visa, food and accommodation are paid by the buyer. Send us the site address and we confirm crew size, days and cost.
Can it join our existing tent? If the eave heights match, yes - a gutter kit links the two roofs. Tell us the existing span.
Is the roof clear or white? Both. Clear panels are popular for bars; white is standard.
Can it be used as a smoking shelter? With open sides and the right local rules, yes. In most of Europe that means 50 percent open, which two wall panels gives you.