logo
Good price  online

products details

Home > Products >
Party Marquee Tents
>
A-Frame Compact Garden Event Party Tent Modular Canopy Aluminum Frame Structure

A-Frame Compact Garden Event Party Tent Modular Canopy Aluminum Frame Structure

Brand Name: Tendars
Model Number: TDP-AF04X08
MOQ: 24 square meters
Price: USD 32-44 / Square Meter
Packaging Details: Frame in one bundle about 3.2m long, fabric in two numbered bags, hardware in one carton
Payment Terms: T/T 30% deposit, balance before shipment; PayPal below USD 5,000
Detail Information
Place of Origin:
Guangdong, China
Certification:
ISO9001, SGS, COC, CE
Span Width:
4m
Length:
8m (2 Bays Of 3m Plus End Frames)
Eave Height:
2.3m
Ridge Height:
3.4m
Floor Area:
32 Square Meters
Area Per Guest:
5 Sqm Per Guest, 6 To 7 Guests
Main Frame:
84 X 48 X 3mm Aluminium 6061/T6
Base Plate:
350 X 350mm Hot Dip Galvanised Steel
Roof Fabric:
650gsm PVC Coated Polyester
Sidewall:
500gsm PVC With Clear Window Option
Wind Load:
0.3 KN/sqm
Frame Life Span:
20+ Years
Production Time:
25 Days
Supply Ability:
60000 Square Meters per Month
Highlight:

A-Frame Garden Party Tent

,

Compact Modular Canopy Tent

,

Aluminum Frame Marquee Tent

Product Description

4m x 8m party tent, 32 sqm

The step up from a garden gazebo. 32 sqm, 6 to 7 guests, and still a two person job that fits on a pickup bed.

Details

4m is the narrowest span where a banquet table for six fits down the middle with a 1m walkway each side. That is why this size outsells the 3m for birthdays and BBQ parties - everybody sits at one table instead of two.

Area guide: 5 sqm per guest under 10m span. 32 sqm holds 6 to 7 guests at two round tables.

The frame is the same 84 x 48 x 3mm section as the 3m and 5m range, which keeps spares simple. The difference at 4m is the roof area: this size catches noticeably more wind than a 3 x 6m, so the anchoring steps up from four stakes to stakes plus two guys.

Size range and options

  • Span: 4m. Range 3m to 10m.
  • Length: 3m bays, so 6, 8, 9, 12m. 8m is two bays plus end frames.
  • Eave: 2.3m standard, 2.0m for a low garden profile.
  • Roof: A-frame at this width. Curved and high peak from 5m.
  • Extras: window walls, half wall + bar counter opening, ground bar, ballast bags, gable door panel.

Main components

Frame. 84 x 48 x 3mm aluminium 6061/T6, galvanised steel connectors, 350 x 350mm base plates. 20+ years.

Covers. 650gsm roof and 500gsm walls, flame retardant and UV stabilised. Heat welded seams, no stitching to rot.

Interchangeable parts. Legs, beams and purlins are shared with the 5m and 6m ranges. A rental company can carry one spares box for the whole range, which is the difference between a stocked van and a shed full of odd parts.

Specification

ItemSpecification
Clear span / length4m / 8m in 3m bays
Eave / ridge2.3m / 3.4m
Frame84 x 48 x 3mm aluminium 6061/T6
Roof / walls650gsm / 500gsm PVC coated polyester
Packed weightAbout 118kg, 0.6 cubic metres
Wind load0.3 kN/sqm with stakes plus two guys
Frame life20+ years

Setup order that saves an hour

Lay the frame out, connect all four legs to the eave beams on the ground, lift one end and pin the ridge, then the other. Pull the roof over before fitting the last purlin - roof fabric on an open frame takes four people instead of two. Walls last, keder into the rail from one end and never force a corner.

Production and installation

25 days production after deposit, plus freight to your port. Two to three people, 1.5 hours. Installation is quoted separately: labour, air tickets, visa, food and accommodation are paid by the buyer. Send us the site address and we confirm crew size, days and cost.

FAQ

Will it fit in a van? Yes. Bundle is 3.2m long and 118kg total - a small van or a trailer.

Can it take a printed roof? Yes, dye sublimation print on the roof and gable, minimum 4 sets for a one-off design.

Is 4m wide enough for a dance floor? A 3 x 3m floor fits with 0.5m each side. For a real party floor, go to 5m.